Home Product Knowledge News Content

The adjustment of the space can through the way of mechanical or hydraulic carries. Using hydraulic regulating system can easily accomplished the adjustment of space through the situ button or the long distance control system. The plate hammer's wearing parts of impact crusher only appears at the side which is towards the materials. When the rotor speed of crusher equipment is normal, the material will fall to the surface (scope of attack) of plate hammer, the back and the side of plate hammer are not be wear out, even the side which is towards the material. The grinding bar in the bottom is easily being changed. The metal utilization rate of plate hammer can be as high as 45% - 48%.

The rotor of impact crusher only installs six plate hammers, with the special tools that provide by HAZEMAG Company we can expediently replace the plate hammer. Changing a plate hammer just need s a flight time, the replacement of grinding bar also need dozens of minutes, which greatly reduce the maintenance time and cost. Impact crusher is suitable for both soft material and hardness material. The board hammers of impact crusher firmly fixed on the rotor which adopts the mechanical clamping structure. When the rotor rotates, it will generate a lot of inertia. Compared with the hammer crusher (hammer head is hanging), the rotor of impact crusher has greater momentum. It can be used for crushing hard material, while the energy consumption is lower.